NSN 5306-01-137-7014
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.812 inches and 1.859 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46C16A for national stock number 5306011377014.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-137-7014.
-
MPN or Model
AN46C16A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.608 inches and 0.687 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.812 inches and 1.859 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Overall Length
2.847 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 2.406 inches and 2.453 inches -
Eye Outside Width
0.750 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-437-0893 MPN NAS1063A4-138ALTerminal Board Marker Strip
- 5305-00-007-6182 MPN NAS1100C04-10PMachine Screw
- 5305-00-058-0778 MPN MS24678-67CSocket Head Cap Screw
- 5305-00-058-5049 MPN MS24694S111Machine Screw
- 5305-00-087-9651 MPN MS24678-26CSocket Head Cap Screw
- 5305-00-150-9579 MPN MILS7839Machine Screw
- 5305-00-167-3631 MPN AN525-416-8Machine Screw
- 5305-00-205-3674 MPN NAS1189CE06P4Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-137-7014 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46C16A | Aeronautical Standards Group |
NASM42 | National Aerospace Standards |
AN46C16A | National Aerospace Standards |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.