NSN 5306-01-140-7824
Wheel Bolt
Between 4.359 inches and 4.406 inches fastener length, hexagon head style, between 0.515 inches and 0.547 inches head height, width between flats: between 1.428 inches and 1.441 inches .
Manufacturer part number AN17-41A for national stock number 5306011407824.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-140-7824.
-
MPN or Model
AN17-41A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.343 inches and 1.422 inches -
Fastener Length
Between 4.359 inches and 4.406 inches -
Head Style
Hexagon -
Head Height
Between 0.515 inches and 0.547 inches -
Width Between Flats
Between 1.428 inches and 1.441 inches -
End Application
Spec item -
Thread Diameter
1.000 inches -
Grip Length
Between 2.984 inches and 3.016 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-552-3047 MPN AN3108B20-29SZCElectrical Plug Connector
- 5935-00-833-5127 MPN AN3102A36-15SCElectrical Receptacle Connector
- 5940-01-135-6069 MPN AN5548-5Lug Terminal
- 5305-00-151-0832 MPN AN526-640-7Machine Screw
- 5305-00-151-1247 MPN AN520-6R10Machine Screw
- 5305-00-151-1494 MPN AN520-3R7Machine Screw
- 5305-00-151-3040 MPN AN526-832-9Machine Screw
- 5305-00-616-2509 MPN AN503-416-14Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-140-7824 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN17-41A | Aeronautical Standards Group |
AN17-41A | Aeronautical Standards Group |
Stock Check
- NS: 2
- NE: 1