NSN 5306-01-142-2131
Coaxial Connector
3.466 inches fastener length, dished hexagon head style, 0.257 inches head height, width between flats: 0.746 inches .
Manufacturer part number NAS6208-47D for national stock number 5306011422131.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-142-2131.
-
MPN or Model
NAS6208-47D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.520 inches -
Fastener Length
3.466 inches -
Head Style
Dished hexagon -
Head Height
0.257 inches -
Width Between Flats
0.746 inches -
Grip Diameter
0.4990 inches -
Shank Unthreaded Hole Diameter
0.177 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
2.938 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.268 inches first hole -
Material
Steel -
Thread Series Designator
Unjf -
Specification Data
80205-nas6208 professional/industrial association standard
More from these suppliers
- 5940-00-156-7196 MPN MS77072-2Lug Terminal
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-008-7871 MPN NAS1191E04P3LSocket Head Cap Screw
- 5305-00-052-8878 MPN MS24630-9Tapping Screw
- 5305-00-053-1332 MPN NAS1191C4P6LSocket Head Cap Screw
- 5305-00-069-5586 MPN MS90725-102Hexagon Head Cap Screw
- 5305-00-071-2242 MPN NASM90725-9Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-142-2131 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6208-47D | National Aerospace Standards |
NAS6208-47D | National Aerospace Standards |
NAS6208-47D | National Aerospace Standards |
NAS6208-47D | National Aerospace Standards |