NSN 5306-01-145-8337
Wheel Bolt
Between 2.990 inches and 3.010 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9785-36 for national stock number 5306011458337.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-145-8337.
-
MPN or Model
MS9785-36
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.945 inches -
Fastener Length
Between 2.990 inches and 3.010 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 2.065 inches and 2.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-067-7296 MPN MS3108R18-1SWCElectrical Plug Connector
- 5935-00-131-9680 MPN MS20002Tip Jack
- 5940-00-132-2761 MPN MS27212-1-10Terminal Board
- 5935-00-134-5301 MPN MS27500E18B32SElectrical Plug Connector
- 5940-00-155-7685 MPN MS77070-5Lug Terminal
- 5935-00-166-0219 MPN MS3101F12S3SElectrical Plug Connector
- 5935-00-173-6111 MPN MS3102A28-9PElectrical Receptacle Connector
- 5935-00-192-1415 MPN MS3108B28-2PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-145-8337 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9785-36 | Military Standards |