NSN 5306-01-148-3680
Coaxial Connector
Between 1.230 inches and 1.260 inches fastener length, spline drive shear head head style, 0.164 inches head height, width between flats: between 0.448 inches and 0.455 inches .
Manufacturer part number VS3133-4-14 for national stock number 5306011483680.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-148-3680.
-
MPN or Model
VS3133-4-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 1.230 inches and 1.260 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Width Between Flats
Between 0.448 inches and 0.455 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-263-8403 MPN BACB30LU3-2Close Tolerance Screw
- 5305-01-054-4631 MPN BACB30LU2-1Close Tolerance Screw
- 5305-01-365-0402 MPN BACB30LR4-5Close Tolerance Screw
- 5305-01-512-8319 MPN 3M1170C4-10AFClose Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5306-00-527-7621 MPN VFK100G-08034Shear Bolt
- 5306-01-044-5192 MPN VAL23607-3-9Shoulder Bolt
- 5306-01-045-2875 MPN VAL23608-6D17Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-148-3680 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3133-4-14 | Arconic Global Fasteners & Rings, |
C7521-4-14 | Sps Technologies, Llc |
C7521-4-14 | Lockheed Martin Corporation |
C7521-4-14 | Valley-todeco, Inc. |
C7521-4-14 | Sps Technologies, Llc |
C7521-4-14 | Sps Technologies, Llc |
C7521-4-14 | Sps Technologies, Llc |
C7521-4-14 | Alcoa Global Fasteners, Inc. |
C7521-4-14 | Huck Intl Inc |
PBF7521-4-14 | Sps Technologies, Llc |
VCG0009-4-14 | Valley-todeco, Inc. |
AIC596-4-14 | Sps Technologies, Llc |
120978-4-14 | Sps Technologies, Llc |
VS3133-4-14 | Alcoa Global Fasteners, Inc. |