NSN 5306-01-152-2279
Close Tolerance Hex Head Bolt
Between 1.399 inches and 1.409 inches fastener length, between 0.076 inches and 0.086 inches hole diameter, between 0.3110 inches and 0.3120 inches grip diameter, grip length: between 0.930 inches and 0.940 inches .
Manufacturer part number 196B8333 for national stock number 5306011522279.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-152-2279.
-
MPN or Model
196B8333
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.399 inches and 1.409 inches -
Hole Diameter
Between 0.076 inches and 0.086 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Grip Length
Between 0.930 inches and 0.940 inches -
Thready Qty Per Inch (tpi)
24 -
Hole Configuration Style
Round -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-332-3100 MPN 218F845Electric And Hydraulic System Components Test Stand
- 5975-01-456-7061 MPN 218F255Electrical-electronic Equipment Chassis
- 5305-00-150-9212 MPN AN502-10-8Machine Screw
- 5306-01-467-0503 MPN 6736596Shoulder Bolt
- 5320-01-232-0468 MPN 209F586-102Pin-rivet
- 5905-00-173-4207 MPN 10120463Film Fixed Resistor
- 5935-00-175-4521 MPN 10131703Electrical Receptacle Connector
- 5935-00-261-7722 MPN 10128851Electrical Plug Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-152-2279 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |
196B8333 | General Dynamics-ots, Inc. |
10116016 | Nimikkeistokeskus Ncb Finland |