NSN 5306-01-152-8641
Wheel Bolt
Between 1.032 inches and 1.052 inches fastener length, hexagon head style, between 0.100 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 9628M72P03 for national stock number 5306011528641.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-152-8641.
-
MPN or Model
9628M72P03
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.301 inches and 0.361 inches -
Fastener Length
Between 1.032 inches and 1.052 inches -
Head Style
Hexagon -
Head Height
Between 0.100 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.650 inches and 0.710 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-126-5928 MPN R984P4821AInductive Wire Wound Fixed Resistor
- 4920-00-159-8725 MPN 1C6211G01Aircraft Engine Maintenance Fixture
- 4920-00-204-4476 MPN 21C5232P01Checking Fixture
- 4920-00-465-9384 MPN 1C5860P139Test Fixture
- 4920-00-471-1055 MPN 1C5757P36Support Set Foot Assembly
- 4920-00-477-5231 MPN 1C5279-2P4Adapter Assembly Cap
- 4920-00-591-2437 MPN 1C2662Nozzle Assy R Stand
- 5935-00-721-0917 MPN 21C1709-117Electrical Connector Cover
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-152-8641 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9628M72P03 | General Electric Company |