NSN 5306-01-152-8646
Coaxial Connector
1.657 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 122113-6H-16 for national stock number 5306011528646.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-152-8646.
-
MPN or Model
122113-6H-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.657 inches -
Fastener Length
1.657 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
1.000 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Iron alloy 660 -
Material Specification
Ams5737 federal specification single material response -
Surface Treatment
Silver -
Surface Treatment Specification
Ams2410 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-445-1270 MPN 110148-4-11Screw Special
- 5305-00-492-3069 MPN 106781-4-6Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-948-4129 MPN NAS1102-3-11Machine Screw
- 5305-01-023-9052 MPN NAS1191-04T8BSocket Head Cap Screw
- 5305-01-044-7113 MPN 66584-3-18Close Tolerance Screw
- 5305-01-053-1885 MPN NAS1190-08P36BSocket Head Cap Screw
- 5305-01-082-2032 MPN 106363-3-7Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-152-8646 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
122113-6H-16 | Sps Technologies, Llc |