NSN 5306-01-154-2589
Coaxial Connector
1.364 inches fastener length, double hexagon extended washer head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.312 inches .
Manufacturer part number J814P040A for national stock number 5306011542589.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-154-2589.
-
MPN or Model
J814P040A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.645 inches -
Fastener Length
1.364 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Grip Diameter
0.2490 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.714 inches and 0.724 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-042-7888 MPN 8209387P30Check Valve
- 5930-00-350-2000 MPN 576C587P5Centrifugal Switch
- 4920-00-507-0900 MPN 1C2539Oil Seal Bear Pilot
- 4920-00-739-5314 MPN 21C2072G001Alignment Fixture
- 5905-00-958-3432 MPN R984P6350AInductive Wire Wound Fixed Resistor
- 4920-01-009-7931 MPN 1C4971G01Aircraft Maintenance Fixture
- 4920-01-078-0132 MPN 21C5554G02Leakage Drain Adapter
- 4920-01-092-7323 MPN 21C8221G01Rotor Guide Adapter
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-154-2589 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J814P040A | General Electric Company |
10116022 | Nimikkeistokeskus Ncb Finland |