NSN 5306-01-154-3973
Wheel Bolt
Between 0.766 inches and 0.812 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number MS21095-3006 for national stock number 5306011543973.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-154-3973.
-
MPN or Model
MS21095-3006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.447 inches -
Fastener Length
Between 0.766 inches and 0.812 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Locking Feature
Patch threads or strip threads or strip threads -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-005-2682 MPN RNC60H1180FMFilm Fixed Resistor
- 5935-00-009-6363 MPN MS3474L10-6PWElectrical Receptacle Connector
- 5935-00-020-7924 MPN MS3126E16-26SYElectrical Plug Connector
- 5935-00-027-0758 MPN MS3120F22-55PElectrical Receptacle Connector
- 5950-00-035-4418 MPN MS75083-07Radio Frequency Coil
- 5935-00-081-4437 MPN MS3106R28-15PElectrical Plug Connector
- 5940-00-082-4889 MPN MS17122-7Stud Terminal
- 5935-00-125-0758 MPN MS17346R24C28PXElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-154-3973 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-3006 | Military Standards |