NSN 5306-01-154-9905
Coaxial Connector
Between 3.512 inches and 3.542 inches fastener length, double hexagon w/hole head style, 0.673 inches head height, width between flats: 0.917 inches .
Manufacturer part number K636196-13 for national stock number 5306011549905.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-154-9905.
-
MPN or Model
K636196-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.127 inches and 1.177 inches -
Fastener Length
Between 3.512 inches and 3.542 inches -
Head Style
Double hexagon w/hole -
Head Height
0.673 inches -
Width Between Flats
0.917 inches -
Extended Washer Diameter
Between 1.185 inches and 1.195 inches -
Extended Washer Thickness
0.125 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-541-9067 MPN NAS1189E08P7LSocket Head Cap Screw
- 5305-00-550-1577 MPN HT4025L4D25Close Tolerance Screw
- 5305-00-702-1616 MPN NAS1133-7Close Tolerance Screw
- 5305-00-833-3273 MPN NAS1124-2Close Tolerance Screw
- 5305-00-838-5448 MPN NAS1101E08-3Machine Screw
- 5305-00-932-1658 MPN 20097L4C20DSocket Head Cap Screw
- 5305-01-025-6408 MPN 106752-02-106CMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-154-9905 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
K636196-13 | Kaman Aerospace Corporation |
K636196-13 | Sps Technologies, Llc |
EWB22-10-38 | Sps Technologies, Llc |
EWB22-10-38 | Sps Technologies, Llc |