NSN 5306-01-155-5227
Close Tolerance Hex Head Bolt
O/a length is 2.8111inches.
Manufacturer part number 11070249 for national stock number 5306011555227.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-155-5227.
-
MPN or Model
11070249
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
End Application
1440-01-074-6799 -
Test Data Document
18876-11070249 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
More from these suppliers
- 5935-00-034-3614 MPN 10132304-1Electrical Receptacle Connector
- 5950-00-050-1167 MPN 10167736Power Transformer
- 4820-00-056-4778 MPN 10018923-001Check Valve
- 5935-00-060-2446 MPN 10608080-15Electrical Receptacle Connector
- 5935-00-103-5768 MPN 10665561Tip Plug
- 5935-00-221-9308 MPN 8148803Electrical Receptacle Connector
- 5935-00-259-4690 MPN 9131026Electrical Receptacle Connector
- 5935-00-295-6318 MPN 10015801-024Electrical Connector Cover
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-155-5227 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
11070249 | U S Army Aviation And Missile |