NSN 5306-01-159-8913
Close Tolerance Hex Head Bolt
Between 0.791 inches and 0.811 inches fastener length, double hexagon extended washer head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.312 inches .
Manufacturer part number J814P004A for national stock number 5306011598913.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-159-8913.
-
MPN or Model
J814P004A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.640 inches and 0.650 inches -
Fastener Length
Between 0.791 inches and 0.811 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.312 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Grip Diameter
Between 0.2490 inches and 0.2500 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.151 inches and 0.161 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Material
Nickel -
Material Specification
C50tf13, cl-b fscm 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-006-5106 MPN 21C6078Airflow Test Bullet Nose
- 4920-00-226-0422 MPN 1C6329G01Aircraft Engine Maintenance Fixture
- 5935-00-246-4448 MPN 21C1526-204Electrical Connector Cover
- 4920-00-300-3771 MPN 1C2026Wrench No 2 Bearing
- 1560-00-531-7055 MPN 9693M62G03Thrust Reverse Plate
- 4920-00-631-8966 MPN 21C318Turbine Shaf Holder
- 4920-00-703-9131 MPN 21C343Compresso Protector
- 4920-00-866-7046 MPN 21C1407G001B Alignment Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-159-8913 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J814P004A | General Electric Company |
J814P04A | General Electric Company |
10116033 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NS: 25
- NE: 316