NSN 5306-01-162-8521
Coaxial Connector
Asymmetric thread per sps-t-282,fscm 56878.
Manufacturer part number 80489-8-12 for national stock number 5306011628521.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-162-8521.
-
MPN or Model
80489-8-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.750 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Thread Series Designator
Uns
More from these suppliers
- 5305-01-050-4992 MPN ST3M466V7L10M1Close Tolerance Screw
- 5305-01-417-2496 MPN TX1027D3-20AClose Tolerance Screw
- 5305-01-512-8311 MPN TX1027C4-11AFClose Tolerance Screw
- 5305-01-512-8378 MPN TX1026C4D14AClose Tolerance Screw
- 5320-00-401-5693 MPN HL910-5-11Pin-rivet
- 5320-01-006-2156 MPN HL13VAP-10-12Pin-rivet
- 5320-01-391-7901 MPN HST529DL-14-24Pin-rivet
- 5320-01-414-5709 MPN HL13VAP-5-26Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-162-8521 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80489-8-12 | Sps Technologies, Llc |
80489-8-12 | Sps Technologies Inc |
76683-8-12 | Sikorsky Aircraft Corporation |
80489-8-12 | Sps Technologies, Llc |
76683S-8-12 | Sps Technologies, Llc |