NSN 5306-01-162-9698
Coaxial Connector
Between 5.773 inches and 5.803 inches fastener length, double hexagon w/hole head style, 0.504 inches head height, width between flats: 0.562 inches .
Manufacturer part number 70150-29150-103 for national stock number 5306011629698.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-162-9698.
-
MPN or Model
70150-29150-103
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.763 inches and 0.813 inches -
Fastener Length
Between 5.773 inches and 5.803 inches -
Head Style
Double hexagon w/hole -
Head Height
0.504 inches -
Width Between Flats
0.562 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
0.123 inches -
Grip Diameter
Between 0.5047 inches and 0.5059 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 4.990 inches and 5.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-023-9512 MPN 65302-12147-084Aircraft Fairing
- 1680-00-068-1094 MPN 65503-00003-045Aircraft Strap Assy
- 1560-00-187-8905 MPN 65209-02033-050Aircraft Access Cover
- 1560-00-405-6833 MPN 65207-10096-115Flipp Trailing Edge
- 1560-00-435-0327 MPN S6107-40117-043Cover Assembly
- 1560-00-700-2587 MPN S6120-62620-3Aircraft Access Door
- 1560-00-827-8986 MPN 65205-08014-103Fuel Tank Canted Strut Fairing
- 1560-00-915-6966 MPN 65209-09017-106Pylon Latch Block
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-162-9698 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70150-29150-103 | Sikorsky Aircraft Corporation |