NSN 5306-01-162-9708
Coaxial Connector
Between 1.128 inches and 1.148 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 80489-5-7 for national stock number 5306011629708.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-162-9708.
-
MPN or Model
80489-5-7
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.680 inches and 0.720 inches -
Fastener Length
Between 1.128 inches and 1.148 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Thread Series Designator
Uns
More from these suppliers
- 1560-01-541-5150 MPN 3M39C05P59Headed Straight Pin
- 5305-00-078-9636 MPN SFT22-5-11Machine Screw
- 5305-00-150-2492 MPN 674230Shoulder Screw
- 5305-00-197-2388 MPN NAS1101E06-16BMachine Screw
- 5305-00-308-1540 MPN 73573-93-6CSocket Head Cap Screw
- 5305-00-539-5342 MPN HT4025L4-12Close Tolerance Screw
- 5305-00-764-3018 MPN 54266-4-14Machine Screw
- 5305-01-084-4686 MPN HT4010-7-12Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-162-9708 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80489-5-7 | Sps Technologies, Llc |
80489-5-7 | Sps Technologies, Llc |