NSN 5306-01-162-9710
Coaxial Connector
Between 1.415 inches and 1.435 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 80489-6-10 for national stock number 5306011629710.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-162-9710.
-
MPN or Model
80489-6-10
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.780 inches and 0.820 inches -
Fastener Length
Between 1.415 inches and 1.435 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Thread Series Designator
Uns
More from these suppliers
- 5305-00-046-9975 MPN BACB30LU2-4Close Tolerance Screw
- 5305-00-411-6532 MPN 66117H8-14Close Tolerance Screw
- 5305-00-541-9319 MPN 106706T8-20Close Tolerance Screw
- 5305-00-880-9828 MPN 406224-3-8Close Tolerance Screw
- 5305-00-915-4765 MPN C792-3-9Machine Screw
- 5305-01-004-6915 MPN NAS1191-08T6LSocket Head Cap Screw
- 5305-01-004-9495 MPN 106752-02-109CMachine Screw
- 5305-01-027-9506 MPN 68069-4-20DSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-162-9710 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
80489-6-10 | Sps Technologies, Llc |
80489-6-10 | Sps Technologies, Llc |
76683-6-10 | Sps Technologies, Llc |
76683S-6-10 | Sps Technologies, Llc |