NSN 5306-01-163-6475
Close Tolerance Hex Head Bolt
Between 2.064 inches and 2.094 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30LT5D26 for national stock number 5306011636475.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-163-6475.
-
MPN or Model
BACB30LT5D26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 2.064 inches and 2.094 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.873 inches first hole and 1.935 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-169-7211 MPN LD111-0044-2418Close Tolerance Screw
- 5305-01-349-9582 MPN VCL0009-6-18Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-512-8368 MPN 3M1170C4-4AClose Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-00-420-6474 MPN MS21250-05034Shear Bolt
- 5306-01-023-0374 MPN BACB30NE4-5Close Tolerance Bolt
- 5306-01-054-4615 MPN BACB30NE7-69Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-163-6475 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LT5D26 | Huck International, Inc. |
BACB30LT5D26 | Valley-todeco, Inc. |
BACB30LT5D26 | Federal Manufacturing Corporation |
BACB30LT5D26 | Sps Technologies, Llc |
BACB30LT5D26 | Sps Technologies, Llc |
BACB30LT5D26 | Sps Technologies, Llc |
BACB30LT5D26 | The Boeing Company |
BACB30LT5D26 | Alcoa Global Fasteners, Inc. |
BACB30LT5D26 | Textron Fastening Systems |
BACB30LT5D26 | Huck Intl Inc |