NSN 5306-01-164-5835
Wheel Bolt
Between 3.911 inches and 3.931 inches fastener length, dished hexagon head style, between 0.313 inches and 0.328 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 7-311525072 for national stock number 5306011645835.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-164-5835.
-
MPN or Model
7-311525072
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.456 inches and 0.749 inches -
Fastener Length
Between 3.911 inches and 3.931 inches -
Head Style
Dished hexagon -
Head Height
Between 0.313 inches and 0.328 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6232 inches and 0.6241 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 3.062 inches and 3.078 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
9500 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-01-171-0441 MPN 7-311A21250-3Butterfly Valve
- 1680-01-233-8361 MPN 7-311172143-37Glareshield Shell
- 1560-01-252-6448 MPN 7-311111211-5Aircraft Access Door
- 5935-01-324-0183 MPN HS5003-0104Electrical Connector Backshell
- 1560-01-464-4492 MPN 7-311150123-93Aircraft Fairing
- 1560-01-472-2282 MPN 7-311930053-49Armor Channel Assy
- 1560-01-472-2252 MPN 7-W11712112-5Bleed Air Duct Assembly
- 1680-01-472-1580 MPN 7-311930040-35Rigid Foam Insulation-ballistic
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-164-5835 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7-311525072 | Boeing Company, The |
MS27576-10-49 | Military Standards |
7-311525072 | Mcdonnell Douglas Helicopter Co Inc |
7-311525072 | Boeing Company, The |