NSN 5306-01-164-7458
Coaxial Connector
Between 2.160 inches and 2.190 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 20-057-4-28D for national stock number 5306011647458.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-164-7458.
-
MPN or Model
20-057-4-28D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 2.160 inches and 2.190 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.972 inches first hole and 2.022 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2597 MPN 100-161-6-2Materi Aircraft Pin
- 5305-00-316-7572 MPN AIC812-02-13Machine Screw
- 5305-00-933-2685 MPN 583030Shoulder Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-101-1434 MPN AIC870-06-8Socket Head Cap Screw
- 5305-01-112-2427 MPN NAS1101E4-28Machine Screw
- 5305-01-207-7550 MPN 3M927-3L3Close Tolerance Screw
- 5305-01-266-9359 MPN AIC985B3-8Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-164-7458 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-057-4-28D | Bell Helicopter Textron Inc. |
20-057-4-28D | Saturn Fasteners Inc |
20-057-4-28D | Huck International, Inc. |
20-057-4-28D | Sps Technologies, Llc |
AIC2057-4-28D | Sps Technologies, Llc |
20-057-4-28D | Arconic Global Fasteners & Rings, |
20-057-4-28D | Sps Technologies, Llc |
PBF1113-4D28 | Sps Technologies, Llc |
120970-4D28 | Sps Technologies, Llc |
20-057-4-28D | Sps Technologies, Llc |
20-057-4-28D | Alcoa Global Fasteners, Inc. |
SC2648-4-28D | Alcoa Global Fasteners, Inc. |
20-057-4-28D | Huck Intl Inc |
20-057-4-28D | Aerospace Rivet Mfrs Corp |