NSN 5306-01-164-8513
Close Tolerance Hex Head Bolt
Retaining element on shank.
Manufacturer part number MS27576-3-18 for national stock number 5306011648513.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-164-8513.
-
MPN or Model
MS27576-3-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.273 inches and 0.318 inches -
Fastener Length
Between 1.497 inches and 1.517 inches -
Head Style
Dished hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.404 inches first hole and 1.434 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-5729 MPN MS24266G16B10SNElectrical Plug Connector
- 5935-00-068-3933 MPN MS3116J8-3SElectrical Plug Connector
- 5905-00-079-3561 MPN MS35834-380Film Fixed Resistor
- 5940-00-082-4663 MPN MS27249-2B3Terminal Board
- 5930-00-088-9327 MPN MS25253-4Sensitive Switch
- 5935-00-170-3496 MPN MS17344R18C4SElectrical Plug Connector
- 5935-00-186-9903 MPN MS27474E16A26SElectrical Receptacle Connector
- 5905-00-299-2020 MPN MS35044-135Composition Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-164-8513 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-3-18 | Military Standards |
Stock Check
- NS: 1000
- NE: 144