NSN 5306-01-164-8521
Close Tolerance Hex Head Bolt
Between 1.320 inches and 1.350 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number LD111-0026-0415 for national stock number 5306011648521.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-164-8521.
-
MPN or Model
LD111-0026-0415
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.320 inches and 1.350 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-109-3893 MPN 55-33468Brake Cable An Link
- 1560-00-327-3181 MPN 191-58803-17Hydraulic Line Assembly
- 1560-00-568-2733 MPN 140-33620Torque Shaft Guard
- 1560-00-694-4393 MPN 176-58413-15Aircraft Structural Component Bracket
- 1560-00-979-4440 MPN 265-530135-32Entrance Handrail
- 4920-01-142-6562 MPN 41A27000-001Altitude Pressu Test Adapter Set
- 4920-01-153-2125 MPN R-TBD-294Cable Breakout Adapter
- 1560-01-164-1351 MPN L5340035-003Aircraft Structural Plate
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-164-8521 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0415 | Boeing Company, The |