NSN 5306-01-165-2455
Close Tolerance Hex Head Bolt
Between 1.514 inches and 1.544 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0026-0517 for national stock number 5306011652455.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-165-2455.
-
MPN or Model
LD111-0026-0517
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.482 inches -
Fastener Length
Between 1.514 inches and 1.544 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-102-5522 MPN ST3M733-3L8Close Tolerance Screw
- 5305-01-512-8325 MPN 3M1170C5-14AFClose Tolerance Screw
- 5306-00-001-4880 MPN MS21250-05054Shear Bolt
- 5306-00-288-2471 MPN VAL203033-7-19Shear Bolt
- 5306-00-326-3986 MPN ST3M453-5-11Close Tolerance Bolt
- 5306-00-526-4160 MPN J646P17AMachine Bolt
- 5306-00-727-0720 MPN VAL21013-12052Shear Bolt
- 5306-01-004-6409 MPN 9138M30P01Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-165-2455 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0517 | Boeing Company, The |
LD111-0026-0517 | Sps Technologies, Llc |
LD111-0026-0517 | Valley-todeco, Inc. |
LD111-0026-0517 | Huck International, Inc. |
LD111-0026-0517 | J.w. Manufacturing, Inc |
LD111-0026-0517 | Sps Technologies, Llc |
LD111-0026-0517 | Abounding Security Inc |
LD111-0026-0517 | Hi-shear Corporation |
LD111-0026-0517 | Sps Technologies, Llc |
LD111-0026-0517 | Alcoa Global Fasteners, Inc. |