NSN 5306-01-165-3306
Close Tolerance Hex Head Bolt
Between 1.820 inches and 1.850 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number LD111-0026-0423 for national stock number 5306011653306.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-165-3306.
-
MPN or Model
LD111-0026-0423
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 1.820 inches and 1.850 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-040-8624 MPN 192-34845-3Tail Skid Oper Stop
- 1560-00-120-8698 MPN 55-52634Flap Control Roller
- 1560-00-732-9827 MPN 265-170008-13Aircraft Structural Component Bracket
- 1680-01-105-6376 MPN 6014-101-300Aircraft Seat Cushion
- 1680-01-180-1896 MPN L6311210-001Retraction Arm
- 1560-01-191-6877 MPN L3003623-012Fairing Shoe
- 4920-01-194-3779 MPN 14C79000-001Aircraft Hydraulic System Components Fixture
- 1560-01-202-6498 MPN L3226311-011Aircraft Structural Panel
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-165-3306 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0423 | Boeing Company, The |