1-321-802-5889
Email Us

NSN 5306-01-165-3307

Close Tolerance Hex Head Bolt

About this product

Retaining element in shank.

Manufacturer part number ST3M735-4-54 for national stock number 5306011653307.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-165-3307.

  • MPN or Model

    ST3M735-4-54

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.282 inches and 0.333 inches
  • Fastener Length
    Between 3.793 inches and 3.813 inches
  • Head Style
    Dished hexagon
  • Head Height
    Between 0.126 inches and 0.141 inches
  • Width Between Flats
    Between 0.430 inches and 0.439 inches
  • Grip Diameter
    Between 0.2483 inches and 0.2492 inches
  • Shank Unthreaded Hole Diameter
    0.076 inches first hole and 0.086 inches first hole
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 3.375 inches and 3.391 inches
  • Thready Qty Per Inch (tpi)
    28
  • Hardness Rating
    36.0 rockwell c and 41.0 rockwell c
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    4.121 inches first hole and 4.151 inches first hole
  • Surface Finish
    63.0 microinches grip
  • Material
    Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416, type 2 class 2 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-165-3307 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011653307

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
ST3M735-4-54 Alcoa Global Fasteners, Inc.
121673-4-54 Sps Technologies, Llc
ST3M735-4-54 Boeing Company, The
ST3M735-4-54 Sps Technologies, Llc
ST3M735-4-54 Valley-todeco, Inc.
ST3M735-4-54 Sps Technologies, Llc
ST3M735-4-54 Sps Technologies, Llc
ST3M735-4-54 Hi-shear Corporation
ST3M735-4-54 Lisi Aerospace Canada Corp
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.