NSN 5306-01-166-1466
Coaxial Connector
Between 0.814 inches and 0.844 inches fastener length, spline drive shear head head style, 0.210 inches head height, width between flats: 0.679 inches .
Manufacturer part number C7521-6-6 for national stock number 5306011661466.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-166-1466.
-
MPN or Model
C7521-6-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 0.814 inches and 0.844 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Width Between Flats
0.679 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-049-5664 MPN BACB30LH3-6Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-477-5761 MPN 3M1169V5-17AClose Tolerance Screw
- 5306-00-273-8213 MPN 68A332100-2001Shoulder Bolt
- 5306-00-950-2902 MPN MS21250-06080Shear Bolt
- 5306-01-043-5724 MPN VEP220121-6F65Shear Bolt
- 5306-01-141-7883 MPN VAL23608-6-40Shoulder Bolt
- 5306-01-145-4561 MPN BACB30LJ3DU12Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-166-1466 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7521-6-6 | Lockheed Martin Corporation |
C7521-6-6 | Sps Technologies, Llc |
C7521-6-6 | Electric Boat Corporation |
C7521-6-6 | Sps Technologies, Llc |
C7521-6-6 | Valley-todeco, Inc. |
C7521-6-6 | Huck International, Inc. |
C7521-6-6 | Sps Technologies, Llc |
C7521-6-6 | Sps Technologies, Llc |
C7521-6-6 | Alcoa Global Fasteners, Inc. |
PBF7521-6-6 | Sps Technologies, Llc |