NSN 5306-01-167-2404
Close Tolerance Hex Head Bolt
Between 4.208 inches and 4.244 inches fastener length, hexagon head style, between 0.501 inches and 0.516 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number 121491-16-48 for national stock number 5306011672404.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-167-2404.
-
MPN or Model
121491-16-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.885 inches and 1.196 inches -
Fastener Length
Between 4.208 inches and 4.244 inches -
Head Style
Hexagon -
Head Height
Between 0.501 inches and 0.516 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.9982 inches and 0.9991 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
1.000 inches -
Grip Length
Between 2.976 inches and 2.992 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
74000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.051 inches first hole and 4.097 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-078-9636 MPN SFT22-5-11Machine Screw
- 5305-00-225-9874 MPN SFH22-6A12Machine Screw
- 5305-00-338-2089 MPN 53B334-19Close Tolerance Screw
- 5305-00-522-9475 MPN HT4024L6-16Close Tolerance Screw
- 5305-00-541-9195 MPN 106706H8A13Close Tolerance Screw
- 5305-01-012-5112 MPN 106752-02-110CMachine Screw
- 5305-01-046-5460 MPN HT4009-4-22Shoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-167-2404 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121491-16-48 | Sps Technologies, Llc |