NSN 5306-01-167-9753
Coaxial Connector
Between 2.138 inches and 2.168 inches fastener length, spline drive shear head head style, 0.281 inches head height, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number VCG0009-8D26 for national stock number 5306011679753.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-167-9753.
-
MPN or Model
VCG0009-8D26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.503 inches and 0.553 inches -
Fastener Length
Between 2.138 inches and 2.168 inches -
Head Style
Spline drive shear head -
Head Height
0.281 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Head Minor Diameter
Between 0.774 inches and 0.782 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.883 inches first hole and 1.913 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-116-9174 MPN ST3M733-3L7Close Tolerance Screw
- 5305-01-435-5841 MPN BACB30LU8-58Close Tolerance Screw
- 5305-01-454-0974 MPN LD111-0046-2415Machine Screw
- 5305-01-494-8910 MPN ST3M652C7-12DClose Tolerance Screw
- 5306-00-158-0772 MPN 9642M19P04Locating Bolt
- 5306-00-966-7138 MPN BACB30GT7-40Shear Bolt
- 5306-01-031-1446 MPN BACB30NF5H27Close Tolerance Bolt
- 5306-01-043-0008 MPN GB511B9D21Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-167-9753 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| VCG0009-8D26 | Valley-todeco, Inc. |
| H411-8D26 | Huck International, Inc. |
| 120978-8D26 | Sps Technologies, Llc |
| 120978-8D26 | Sps Technologies, Llc |
| AIC596-8D26 | Sps Technologies, Llc |
| PBF7521-8D26 | Sps Technologies, Llc |
| C7521-8D26 | Lockheed Martin Corporation |
| VCG0009-8D-26 | Hy-way Heat Systems Inc |
| S120978-8-26 | Sps Technologies, Llc |
| 80539120978-8-26 | Sps Technologies, Llc |
| VS3133-8D26 | Alcoa Global Fasteners, Inc. |
| VS3133-8D26 | Arconic Global Fasteners & Rings, |
| C7521-8D26 | Valley-todeco, Inc. |
| C7521-8D26 | Huck International, Inc. |
| C7521-8D26 | Sps Technologies, Llc |
| C7521-8D26 | Alcoa Global Fasteners, Inc. |
| VS3133-8D26 | Tactair Fluid Controls, Inc. |
Stock Check
