NSN 5306-01-168-6740
Coaxial Connector
Between 1.027 inches and 1.074 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number EWSB22-4A12 for national stock number 5306011686740.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-168-6740.
-
MPN or Model
EWSB22-4A12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.293 inches -
Fastener Length
Between 1.027 inches and 1.074 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-6359 MPN 20097L96C4CSocket Head Cap Screw
- 5305-00-151-9930 MPN SFH22-5A22Close Tolerance Screw
- 5305-00-931-3157 MPN 73573-5-26CSocket Head Cap Screw
- 5305-01-015-5690 MPN S5008-4-3Close Tolerance Screw
- 5305-01-043-5735 MPN 67077-4-20Close Tolerance Screw
- 5305-01-050-9676 MPN ST3M505-4-10Shoulder Screw
- 5305-01-063-3777 MPN NAS1190-08P26BSocket Head Cap Screw
- 5305-01-105-1143 MPN HT4068-4-11AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-168-6740 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-4A12 | Sps Technologies, Llc |
EWSB22-4A12 | Sps Technologies, Llc |