NSN 5306-01-169-7233
Close Tolerance Hex Head Bolt
Between 2.334 inches and 2.381 inches fastener length, spline drive shear head head style, 0.350 inches head height, width between flats: between 0.970 inches and 0.978 inches .
Manufacturer part number 3M1046-10-23 for national stock number 5306011697233.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-169-7233.
-
MPN or Model
3M1046-10-23
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.886 inches and 0.953 inches -
Fastener Length
Between 2.334 inches and 2.381 inches -
Head Style
Spline drive shear head -
Head Height
0.350 inches -
Width Between Flats
Between 0.970 inches and 0.978 inches -
Hole Diameter
Between 0.065 inches and 0.074 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.146 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
145000 pounds per square inch -
Hole Configuration Style
Spline -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.080 inches first hole and 2.137 inches first hole -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2993 MPN LS15264V3-10Machine Screw
- 5305-00-802-2667 MPN 51B222-18HMachine Screw
- 5305-00-855-7908 MPN NAS1102-02-3Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-086-3552 MPN NAS1101-04-24Machine Screw
- 5305-01-102-5519 MPN ST3M714-3-5Close Tolerance Screw
- 5305-01-150-8725 MPN PBF1069-101CSocket Head Cap Screw
- 5305-01-413-7374 MPN PBF1475-4-29Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-169-7233 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1046-10-23 | Boeing Company, The |
81921-10-23 | Sps Technologies, Llc |
PBF1426-10-23 | Sps Technologies, Llc |
10116077 | Nimikkeistokeskus Ncb Finland |