NSN 5306-01-170-9092
Coaxial Connector
Between 1.453 inches and 1.483 inches fastener length, double hexagon w/hole head style, 0.276 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number LD111-0021-0514 for national stock number 5306011709092.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-170-9092.
-
MPN or Model
LD111-0021-0514
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.618 inches and 0.668 inches -
Fastener Length
Between 1.453 inches and 1.483 inches -
Head Style
Double hexagon w/hole -
Head Height
0.276 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-156-8790 MPN 88-42005-13H Engine E Manifold
- 1560-00-189-1098 MPN 55-14011-6Wing Tip Assembly
- 1560-00-192-3549 MPN 170-52010Su Support Assembly
- 1560-00-326-2883 MPN 151-42053Accessory Cover Engine Clip
- 1560-00-963-7183 MPN 285-522029-3Control System Operating Arm
- 1560-01-013-1245 MPN 265-333332-3Aircraft Structural Component Support
- 1560-01-134-6378 MPN 265-321353-4Aircraft Structural Component Support
- 4920-01-150-8980 MPN LE394-0002-0001Aircraft Maintenance Fixture
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-170-9092 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0514 | Boeing Company, The |
Stock Check
- NS: 63
- NE: 64