NSN 5306-01-172-2540
Coaxial Connector
Between 1.798 inches and 1.828 inches fastener length, double hexagon w/hole head style, 0.401 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number LD111-0021-0816 for national stock number 5306011722540.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-172-2540.
-
MPN or Model
LD111-0021-0816
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.798 inches and 0.828 inches -
Fastener Length
Between 1.798 inches and 1.828 inches -
Head Style
Double hexagon w/hole -
Head Height
0.401 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
0.123 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-156-3153 MPN 88-34169Tailwheel Bellcrank
- 1560-00-197-7498 MPN 168-31834Cockpit Enclo Glass
- 1560-00-247-9558 MPN 151-39025-4Aircraft Latch Assembly
- 1560-01-137-9927 MPN 265-530013-3Door
- 4920-01-147-4527 MPN R-TBD-221Aircraft Maintenance Fixture
- 4920-01-172-9474 MPN 41C43000-001Test Adapter
- 5930-01-174-4831 MPN L5265009-003Switch Actuator Arm
- 1560-01-174-7150 MPN L3300102-021Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-172-2540 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0816 | Boeing Company, The |