NSN 5306-01-173-1067
Coaxial Connector
Between 0.687 inches and 0.717 inches fastener length, double hexagon w/hole head style, 0.196 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number LD111-0021-0305 for national stock number 5306011731067.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-173-1067.
-
MPN or Model
LD111-0021-0305
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.415 inches -
Fastener Length
Between 0.687 inches and 0.717 inches -
Head Style
Double hexagon w/hole -
Head Height
0.196 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
0.064 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-187-7002 MPN 151-24001Vertical Stabilizer
- 4920-00-398-3644 MPN E1585Slat Strap Assembly
- 1680-00-536-2292 MPN 192-547246-3Electrical Ru Plate
- 1560-01-127-5289 MPN 151-3182-12Aircraft Structural Component Support
- 1560-01-190-9239 MPN L3003506-332Fairing Shoe
- 1560-01-191-6870 MPN L3003623-063Fairing Shoe
- 1560-01-205-0556 MPN L9536111Bleed Air Duct Assembly
- 1560-01-225-3091 MPN L3005635-011Aircraft Structural Panel
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-173-1067 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0305 | Boeing Company, The |