NSN 5306-01-173-5030
Wheel Bolt
Between 7.265 inches and 7.312 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12C71A for national stock number 5306011735030.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-173-5030.
-
MPN or Model
AN12C71A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.061 inches and 1.140 inches -
Fastener Length
Between 7.265 inches and 7.312 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 6.172 inches and 6.204 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-258-8889 MPN AN3108M14S5SElectrical Plug Connector
- 5935-00-259-2705 MPN AN3102M22-14SElectrical Receptacle Connector
- 5305-00-026-2123 MPN AN565A2L1Setscrew
- 5305-00-151-2927 MPN AN500-10-8Machine Screw
- 5305-00-151-3096 MPN AN509-716R21Machine Screw
- 5305-00-206-6355 MPN AN535-4Drive Screw
- 5305-00-207-0137 MPN AN515C6-24Machine Screw
- 5305-00-271-8050 MPN AN515C10-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-173-5030 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12C71A | Aeronautical Standards Group |