NSN 5306-01-174-3530
Coaxial Connector
Between 1.360 inches and 1.390 inches fastener length, double hexagon w/hole head style, 0.401 inches head height, width between flats: between 0.631 inches and 0.651 inches .
Manufacturer part number LD111-0021-0809 for national stock number 5306011743530.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-174-3530.
-
MPN or Model
LD111-0021-0809
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.798 inches and 0.828 inches -
Fastener Length
Between 1.360 inches and 1.390 inches -
Head Style
Double hexagon w/hole -
Head Height
0.401 inches -
Width Between Flats
Between 0.631 inches and 0.651 inches -
Extended Washer Diameter
Between 0.818 inches and 0.828 inches -
Extended Washer Thickness
0.123 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-030-5295 MPN 187-14480-1Aircraft Tip
- 1560-00-185-3748 MPN 36-52507-2Control Quadr Block
- 1560-00-388-8520 MPN 152-52007Cont Cable Fairlead
- 5930-00-961-1721 MPN NA5-72391-1Sensitive Switch
- 5975-01-175-6092 MPN L5408713-061Electrical Equipment Mounting Base
- 5935-01-176-1715 MPN LE482-0031-2004Electrical Connector Backshell
- 5935-01-183-6498 MPN LE482-0032-2407Electrical Connector Backshell
- 1560-01-189-2588 MPN L5351317-001Air Inlet Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-174-3530 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0809 | Boeing Company, The |