NSN 5306-01-174-6531
Coaxial Connector
0.682 inches fastener length, flat countersunk head style, between 0.1880 inches and 0.1890 inches grip diameter, single shear strength: 156000 pounds per square inch.
Manufacturer part number SFT26-3-A7 for national stock number 5306011746531.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-174-6531.
-
MPN or Model
SFT26-3-A7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.236 inches -
Fastener Length
0.682 inches -
Head Style
Flat countersunk -
Grip Diameter
Between 0.1880 inches and 0.1890 inches -
Single Shear Strength
156000 pounds per square inch -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837, type 1, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-422-1655 MPN 3M263-4-10Close Tolerance Screw
- 5305-00-680-6395 MPN NAS1203-5Close Tolerance Screw
- 5305-00-815-9416 MPN NAS1205-13DClose Tolerance Screw
- 5305-01-023-9052 MPN NAS1191-04T8BSocket Head Cap Screw
- 5305-01-064-6265 MPN HT4025L5-8Close Tolerance Screw
- 5305-01-130-3263 MPN NAS1190E04P12Socket Head Cap Screw
- 5305-01-272-9967 MPN 28711P-92C-3Setscrew
- 5305-01-285-4926 MPN ST3M733-5L5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-174-6531 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT26-3-A7 | Sps Technologies, Llc |
SFT26-3-A7 | Sps Technologies, Llc |