NSN 5306-01-175-5700
Coaxial Connector
Between 1.695 inches and 1.745 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number BACB30LM3U22 for national stock number 5306011755700.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-175-5700.
-
MPN or Model
BACB30LM3U22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
10 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.330 inches and 0.360 inches -
Fastener Length
Between 1.695 inches and 1.745 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-031-5585 MPN 10-1472-1Check Valve
- 1560-00-073-6950 MPN 107R554-1Rotor Slider Guide Assembly
- 1560-00-096-8773 MPN 9-29570Valve Universal Nozzle Spider
- 1680-00-343-4096 MPN 5-96318-2Window Curtain
- 1560-00-586-9166 MPN 39-7684-1Side Pin Latch Nacelle Fitting
- 1560-00-613-7631 MPN 60-3030Ruddervator Cable Connector
- 1560-00-668-5534 MPN 9-60088-4Engine To Strut Mount Link
- 1560-00-672-1272 MPN 5-89347-4Lower Trailing Ed Panel Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-175-5700 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM3U22 | The Boeing Company |