NSN 5306-01-176-1975
Wheel Bolt
Between 1.220 inches and 1.230 inches fastener length, hexagon head style, between 0.167 inches and 0.183 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number J854P008A for national stock number 5306011761975.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-176-1975.
-
MPN or Model
J854P008A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.658 inches and 0.668 inches -
Fastener Length
Between 1.220 inches and 1.230 inches -
Head Style
Hexagon -
Head Height
Between 0.167 inches and 0.183 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-018-3027 MPN 518D546G1Test Cell Hose Assy
- 4920-00-179-5426 MPN 1C5971G01Aircraft Engine Maintenance Fixture
- 4920-00-361-3574 MPN 1C3992G2Pressure Test Tool Set
- 4920-00-570-8617 MPN 133A4192G1Rear Comp Drill Jig
- 4920-00-574-1492 MPN 21C3615G001Drive Follower Holding Fixture
- 5905-00-792-5971 MPN R999P0820AInductive Wire Wound Fixed Resistor
- 4920-00-928-2860 MPN 21C3059G001Aircraft Maintenance Fixture
- 5905-00-932-2328 MPN R984P1270AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-176-1975 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J854P008A | General Electric Company |