NSN 5306-01-176-1976
Wheel Bolt
Between 1.229 inches and 1.239 inches fastener length, double hexagon extended washer head style, 0.303 inches head height, width between flats: 0.3125 inches .
Manufacturer part number J814P032A for national stock number 5306011761976.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-176-1976.
-
MPN or Model
J814P032A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.645 inches -
Fastener Length
Between 1.229 inches and 1.239 inches -
Head Style
Double hexagon extended washer -
Head Height
0.303 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.065 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-024-5442 MPN 1C2053-2Compressor A Shield
- 4920-00-215-2222 MPN 1C2036Interface Device Adapter Assembly
- 4920-00-411-5417 MPN 9413M74G02Trimmer Clamp Assy
- 5945-00-539-5412 MPN 1C1804-92Electromagnetic Relay
- 5905-00-959-1169 MPN R995P5000AInductive Wire Wound Fixed Resistor
- 5905-00-959-8953 MPN R984P0850AInductive Wire Wound Fixed Resistor
- 4920-01-045-9060 MPN 21C5920G01Aircraft Engine Ignition Test Set
- 4920-01-146-8293 MPN MVT89029A1S1568TMarmon Exhaust Clamp
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-176-1976 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J814P032A | General Electric Company |