NSN 5306-01-176-1981
Wheel Bolt
0.250 inches fastener length, double hexagon w/hole head style, between 0.195 inches and 0.205 inches head height, width between flats: 0.1875 inches .
Manufacturer part number J641P01F for national stock number 5306011761981.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-176-1981.
-
MPN or Model
J641P01F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.250 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.195 inches and 0.205 inches -
Width Between Flats
0.1875 inches -
Extended Washer Diameter
Between 0.260 inches and 0.270 inches -
Extended Washer Thickness
Between 0.030 inches and 0.035 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Thread Diameter
0.138 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel -
Thread Series Designator
Unjc
More from these suppliers
- 4920-00-050-3737 MPN 518D550P4Vibration Amplifier
- 4920-00-075-1259 MPN 21C898G001Aircraft Engine Maintenance Fixture
- 4820-00-113-6418 MPN 7003M34P01Check Valve
- 4920-00-159-8898 MPN 1C6191G01Interface Device Adapter Assembly
- 4920-00-191-8365 MPN 1C2770-3G1Rear Cradle Assembly
- 4920-00-463-1006 MPN 1C5277-1P20Cradle Support Pump Base
- 5905-00-959-1507 MPN R983P5361CFilm Fixed Resistor
- 5905-01-114-6483 MPN J165P7871AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-176-1981 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J641P01F | General Electric Company |
J641P01F | Aero Fastener Co., Inc. |
J641P01F | Adams Industries Inc |
J641P01F | Vsi Corp |