NSN 5306-01-176-1988
Coaxial Connector
Between 2.417 inches and 2.447 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6204-33 for national stock number 5306011761988.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-176-1988.
-
MPN or Model
NAS6204-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 2.417 inches and 2.447 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Material Specification
Mil-s-5000, 4340 or e4340 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6204 professional/industrial association standard
More from these suppliers
- 5935-00-687-0853 MPN NAS714-11Electrical Receptacle Connector
- 5935-01-613-0211 MPN MS31081R-22-10SElectrical Plug Connector
- 5940-01-451-4891 MPN NAS1063A10-105BWTerminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-007-9896 MPN NAS1102E04-26PMachine Screw
- 5305-00-043-2680 MPN MS24694S97Machine Screw
- 5305-00-059-8228 MPN MS35214-3Machine Screw
- 5305-00-121-3564 MPN MS27577-4-16Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-176-1988 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-33 | National Aerospace Standards |