NSN 5306-01-176-5023
Wheel Bolt
0.996 inches fastener length, double hexagon w/hole head style, between 0.293 inches and 0.303 inches head height, width between flats: 0.3125 inches .
Manufacturer part number J414P013A for national stock number 5306011765023.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-176-5023.
-
MPN or Model
J414P013A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.674 inches -
Fastener Length
0.996 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.293 inches and 0.303 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.065 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-236-4403 MPN 9667M16P06Thrust Reverser Connector
- 4920-00-512-0553 MPN 1C2510Adustable Gage Set
- 5905-00-907-3397 MPN R999P1310AInductive Wire Wound Fixed Resistor
- 4820-00-917-2178 MPN 708B526P2Check Valve
- 4920-01-316-9396 MPN 9455M49P01Aircraft Maintenance Fixture
- 4920-01-352-2966 MPN 3C3424P11Aircraft Maintenance Fixture
- 4920-01-447-4535 MPN 3R1238G01Aircraft Engine Maintenance Fixture
- 4920-01-496-4209 MPN 1407M72G01Aircraft Engine Maintenance Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-176-5023 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J414P013A | General Electric Company |