NSN 5306-01-177-4988
Wheel Bolt
Between 1.385 inches and 1.405 inches fastener length, double hexagon w/hole head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.3125 inches .
Manufacturer part number J814P046A for national stock number 5306011774988.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-177-4988.
-
MPN or Model
J814P046A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.520 inches -
Fastener Length
Between 1.385 inches and 1.405 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-043-4680 MPN R984P0210AInductive Wire Wound Fixed Resistor
- 4920-00-075-5710 MPN 21C3097G001Aircraft Engine Maintenance Fixture
- 4920-00-354-8216 MPN 1C2461P8Test Stand Clamp
- 4920-00-753-5292 MPN 21C1360G001Pressure Check Kit
- 4920-00-856-9022 MPN 1C4902G1Aircraft Maintenance Fixture
- 5905-00-964-2235 MPN R984P1350BInductive Wire Wound Fixed Resistor
- 4920-01-004-3138 MPN 21C3776P01Aircraft Maintenance Alignment Jig
- 4920-01-007-4162 MPN 21C5527G02Fire Hazard Detector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-177-4988 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J814P046A | General Electric Company |