NSN 5306-01-178-0184
Wheel Bolt
Between 0.822 inches and 0.842 inches fastener length, double hexagon w/hole head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.3125 inches .
Manufacturer part number J814P013A for national stock number 5306011780184.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-178-0184.
-
MPN or Model
J814P013A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.520 inches -
Fastener Length
Between 0.822 inches and 0.842 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-147-3695 MPN 1C6295G01Aircraft Engine Maintenance Fixture
- 4920-00-981-9155 MPN 1C3765Horizontal Adapter
- 1560-01-031-5712 MPN 9154M16G01Fluid Manifold
- 4920-01-095-8518 MPN 1C6790G01Aircraft Engine Maintenance Fixture
- 5905-01-114-9318 MPN J165P6980AInductive Wire Wound Fixed Resistor
- 4920-01-120-0467 MPN 21C8202G02Rotor Guide Adapter
- 4920-01-229-8810 MPN 1C6279G02Aircraft Maintenance Fixture
- 5905-01-260-3781 MPN J690P9319AInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-178-0184 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J814P013A | General Electric Company |
Stock Check
- NS: 3
- NE: 119