NSN 5306-01-178-0784
Coaxial Connector
Orilled head for lock wire.
Manufacturer part number 70209-27010-101 for national stock number 5306011780784.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-178-0784.
-
MPN or Model
70209-27010-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
194120 - Washers/gaskets/pckg Dvcs NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
2.528 inches -
Head Style
Hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.867 inches -
Hole Diameter
0.141 inches -
Grip Diameter
Between 0.5600 inches and 0.5610 inches -
Thread Diameter
0.562 inches -
Grip Length
1.688 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
392000 pounds per square inch -
Hole Configuration Style
Round -
Material
Stainless steel -
Material Specification
Nas1959 fscm, 80205 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-068-1089 MPN 65503-00003-043Aircraft Strap Assy
- 1560-00-068-9953 MPN 65207-09016-041Aircraft Access Door
- 1560-00-106-8403 MPN 65207-10081-041Ramp Fitting Assy
- 1560-00-111-1602 MPN 65205-08037-102Aircraft Fairing
- 1560-00-143-7342 MPN 65407-05006-042Towboom Assembly Fitting
- 1560-00-163-1964 MPN 61200-66400-041Aircraft Pylon
- 1680-00-332-4924 MPN S10-20-2087-28Outside Handle Assy
- 1560-00-417-8189 MPN S6120-62115-007Angle Cap
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-178-0784 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70209-27010-101 | Sikorsky Aircraft Corporation |
Stock Check
- NE: 129