NSN 5306-01-178-5660
Wheel Bolt
Between 2.365 inches and 2.375 inches fastener length, double hexagon w/hole head style, between 0.293 inches and 0.295 inches head height, width between flats: 0.3125 inches .
Manufacturer part number J644P30A for national stock number 5306011785660.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-178-5660.
-
MPN or Model
J644P30A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.713 inches and 0.719 inches -
Fastener Length
Between 2.365 inches and 2.375 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.293 inches and 0.295 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.065 inches -
Hole Diameter
Between 0.075 inches and 0.085 inches -
Thread Diameter
0.250 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-220-5645 MPN 931A331Throttle Indicator Transmitter
- 4920-00-927-6225 MPN 21C2094-012Stage 1 Assembly
- 4920-00-931-5482 MPN 21C2788P010Heater Probe Assembly
- 5905-00-958-3517 MPN R984P0382AInductive Wire Wound Fixed Resistor
- 4920-01-064-8512 MPN 21C3223G01Aircraft Maintenance Fixture
- 4920-01-215-7007 MPN 3C3003P37Aircraft Engine Maintenance Fixture
- 5905-01-249-5743 MPN J350P0400AInductive Wire Wound Fixed Resistor
- 1560-01-522-0371 MPN 9667M33G05Aircraft Structural Component Support
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-178-5660 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J644P30A | General Electric Company |