NSN 5306-01-178-9307
Coaxial Connector
With slot 0.125 in. Deep on thd end.
Manufacturer part number BM28630-4 for national stock number 5306011789307.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-178-9307.
-
MPN or Model
BM28630-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.330 inches -
Fastener Length
0.580 inches -
Head Style
Double hexagon extended washer -
Head Height
0.348 inches -
Width Between Flats
Between 0.368 inches and 0.377 inches -
Extended Washer Diameter
0.526 inches -
Extended Washer Thickness
0.082 inches -
Locking Feature
Patch threads -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-915-2204 MPN NAS1123-29Close Tolerance Screw
- 5305-00-945-2555 MPN NAS1190-04P6LSocket Head Cap Screw
- 5305-01-013-9599 MPN BM19031-7-25DClose Tolerance Screw
- 5305-01-102-7955 MPN HT4067-4-6Close Tolerance Screw
- 5305-01-141-7194 MPN 3M902C5-22DShoulder Screw
- 5305-01-141-7914 MPN ST3M495-4-51-1Shoulder Screw
- 5305-01-193-9674 MPN HT4072-4-7-5Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-178-9307 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM28630-4 | Huck International, Inc. |
BM28630-4 | Huck Intl Inc |