NSN 5306-01-179-0902
Close Tolerance Hex Head Bolt
Vacuum cadmium plated;heat treat 280,000 psi minimum ultimate tenstile strength, rc52 minimum for maraging, rc53 minimum for aermet;magnetic particle inspect 100 percent per astm e 1444;undrilled head;head of bolt to be forged;thread shall be rolled after heat treatment;fatigue, minimum tension-tension fatigue loads, high loads equals 11,800 lbs, low load equals 1,180 lbs;high fatigue strength based on 48percent of min. Tenstile strength and 10 percent of high tenstile strength.
Manufacturer part number HS6051-6-21 for national stock number 5306011790902.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-179-0902.
-
MPN or Model
HS6051-6-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
2.312 inches -
Head Style
Double hexagon -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.343 inches and 0.353 inches -
Thread Diameter
0.375 inches -
Grip Length
1.313 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
280000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, double hexagon, tension, 280, 000 psi tenstile strength, 450 degress f -
Material
Steel comp 305 -
Material Specification
Ams5514 assn standard single material response or ams6532 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-6887, ty2, cl2 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-163-7052 MPN 7-211515061Lock Release Handle
- 1680-01-181-8305 MPN 7-115121005-6Pivot Support Assy
- 1560-01-203-2026 MPN 7-311517067-3Contr Spad Assembly
- 1560-01-249-8477 MPN 7-311122602-24Fwd Stabilize Angle
- 5935-01-283-2133 MPN 33-7015-7Electrical Receptacle Connector
- 5935-01-470-4725 MPN HS5703Electrical Plug Connector
- 1560-01-471-5357 MPN 7-311180041-205Special Purpose Thermal Insulation
- 1680-01-472-2987 MPN 7-311930040-25Rigid Foam Insulation-ballistic
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-179-0902 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS6051-6-21 | Space-lok, Inc. |
SLB361-6-21 | Space-lok, Inc. |
HS6051-6-21 | Boeing Company, The |
HS6051-6-21 | Mcdonnell Douglas Helicopter Co Inc |