NSN 5306-01-179-9450
Wheel Bolt
Between 0.865 inches and 0.885 inches fastener length, double hexagon extended washer head style, between 0.328 inches and 0.348 inches head height, width between flats: 0.3750 inches .
Manufacturer part number J645P11B for national stock number 5306011799450.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-179-9450.
-
MPN or Model
J645P11B
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.873 inches -
Fastener Length
Between 0.865 inches and 0.885 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.328 inches and 0.348 inches -
Width Between Flats
0.3750 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.3125 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-113-6070 MPN 21C2344P013Rear Bearin Adapter
- 5930-00-119-6607 MPN 517D870P01Pressure Switch
- 5905-00-126-5887 MPN R984P0280AInductive Wire Wound Fixed Resistor
- 5905-00-126-5926 MPN R984P4781AInductive Wire Wound Fixed Resistor
- 4920-00-169-2853 MPN 1C6185G01Aircraft Engine Maintenance Fixture
- 4920-00-401-5443 MPN 1C5912G01Aircraft Engine Ignition Test Set
- 4920-00-570-8615 MPN 133A4187G2Test Stan Parts Kit
- 4920-00-571-9009 MPN 21C1111G001Rigging Pin
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-179-9450 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J645P11B | General Electric Company |
J645P11B | M.s. Aerospace Inc. |
J645P11B | Acufast Aircraft Products Inc. |
Stock Check
- NS: 20
- NE: 90