1-321-802-5889

NSN 5306-01-182-9109

Coaxial Connector

About this product

Between 1.235 inches and 1.265 inches fastener length, double hexagon w/hole head style, 0.234 inches head height, width between flats: between 0.304 inches and 0.313 inches .

Manufacturer part number LD111-0020-0412 for national stock number 5306011829109.

Datasheet

  • Product description

    Shear Bolt NSN 5306-01-182-9109.

  • MPN or Model

    LD111-0020-0412

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.485 inches and 0.515 inches
  • Fastener Length
    Between 1.235 inches and 1.265 inches
  • Head Style
    Double hexagon w/hole
  • Head Height
    0.234 inches
  • Width Between Flats
    Between 0.304 inches and 0.313 inches
  • Extended Washer Diameter
    Between 0.428 inches and 0.438 inches
  • Extended Washer Thickness
    0.069 inches
  • Hole Diameter
    Between 0.034 inches and 0.042 inches
  • Grip Diameter
    Between 0.2490 inches and 0.2495 inches
  • Thread Diameter
    0.250 inches
  • Grip Length
    0.750 inches
  • Hole Quantity
    4
  • Hole Type
    Drilled
  • Thready Qty Per Inch (tpi)
    28
  • Min. Tensile Strength (psi)
    220000 pounds per square inch
  • Hardness Rating
    46.0 rockwell c and 50.0 rockwell c
  • Hole Configuration Style
    Double hexagon flats
  • Material
    Steel comp xm-13
  • Material Specification
    Ams5629 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
Shear Bolt

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

Mechanic Bill explains Coaxial Connector

Pricing and Availability

Get a quote for 5306-01-182-9109 shear bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011829109

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
LD111-0020-0412 Boeing Company, The
LD111-0020-0412 Valley-todeco, Inc.
LD111-0020-0412 Sps Technologies, Llc
LD111-0020-0412 Sps Technologies, Llc
LD111-0020-0412 Sonic Industries Inc.
LD111-0020-0412 Sps Technologies, Llc
LD111-0020-0412 Hi-shear Corporation
LD111-0020-0412 Sps Technologies, Llc
Stock Check
Availability for this item was last checked on 02/26/24. The quantities and conditions available at the time were:
  • NE: 77
  • NS: 1